Key takeaways
- ✦A fit-out clean is different from regular cleaning, because fine construction dust settles on every surface, inside and out.
- ✦Plan the clean for after the trades finish and before furniture and staff move in.
- ✦Construction dust can contain silica, so it should be removed with H or M class vacuums, not dry swept.
- ✦Allow time for a final touch-up clean after the furniture is delivered.
- ✦Agree the scope in writing, including inside cupboards, glass, vents and floors.
Quick answer
Office fit-out cleaning removes the fine dust, debris and marks that builders and trades leave behind, so the space is ready for your team to move in. It usually covers every surface from top to bottom, including vents and light fittings, glass and window frames, inside cupboards and drawers, kitchens, washrooms and all floors. It's a larger job than a regular clean, because construction dust penetrates places that routine cleaning doesn't reach.
Schedule it for after the trades have finished and before the furniture arrives, and allow time for a quick touch-up once everything is in position. We offer post-construction cleaning for commercial spaces as well as homes, and we agree on the scope with you before we start.
Why a fit-out clean is different
Building work creates fine dust that continues settling for days after the trades leave. It accumulates on top of cupboards, inside drawers, on light fittings and air vents, and in the corners of every room, and it returns quickly if it's only wiped around. In addition to the dust, there are usually stickers, paint marks, silicone smears, packaging and offcuts to deal with as well.
A regular office clean isn't designed for this, so the work usually requires additional time, more people and a careful sequence of tasks, from the ceiling down to the floor.
Construction dust and silica
Some construction dust is more than an inconvenience, and it needs to be handled carefully. Many building materials, such as concrete, brick, tiles and stone, can contain crystalline silica, and cutting, drilling or sanding them can release very fine dust into the air. SafeWork NSW's silica safety checklist lists clean-up activities such as sweeping or blowing dust with compressed air as a source of exposure, and recommends using H or M class vacuums for safe clean-up.
SafeWork NSW also says dry sweeping and compressed air should never be used to clean up silica dust, because they put the dust back into the air. WorkSafe Queensland adds that general purpose vacuum cleaners aren't designed for hazardous dusts, even when they have a HEPA filter. Before you book a fit-out clean, ask your cleaner how they'll remove construction dust safely, and note that our team uses H and M class rated vacuums for construction dust after fit-outs and renovations.
What a fit-out clean should cover
Every fit-out is different, so agree on the scope in writing, although most office fit-out cleans include the tasks listed below.
Plan the clean in stages
Timing makes a significant difference to the result, because if the clean happens while trades are still working, the dust will settle again immediately. A simple plan usually looks something like this:
- Builders clean: the builder removes the main rubbish and debris once their work is finished.
- Detailed clean: a complete clean from top to bottom after all trades are finished, and before the furniture is delivered.
- Touch-up clean: a lighter clean after the furniture and IT equipment are installed, because unpacking creates additional dust and rubbish.
Confirm the handover date with your builder, and schedule the cleaning around it, with a day or two to spare in case the work runs late.
Before your team moves in
Once the space is clean, it needs to be ready for daily use. The ACT's approved code of practice for managing the work environment and facilities says workplace facilities, such as toilets and eating areas, must be kept clean, safe and in good working order, so confirm the kitchen and washrooms are fully stocked before the first day.
Watch out for wet floors on move-in day as well, because WorkSafe ACT's advice on slips, trips and falls suggests posting warning signs when floors have just been mopped. It's also an ideal opportunity to organise your regular cleaning, so that the new office stays clean from the first week, and our office cleaning checklist can help you decide what you need.
Book your fit-out clean
Aussie Duo is a family-owned Canberra business that has been cleaning since 2013. We clean commercial spaces after fit-outs and renovations, and we begin with a site visit to agree on the scope, timing and price before any work starts. Once you've moved in, we can also manage your regular office cleaning. To get started, request a quote or call 02 5501 3316, and we'll reply during business hours, Monday to Saturday, from 7am to 7pm.
Frequently asked questions
Straight answers to the questions Canberra businesses ask us most.
📝 References & sources
Share Your Experience
We'd love to hear your thoughts about this article


