Key takeaways
- ✦Soak up fresh oil straight away with an absorbent such as kitty litter, then bag it and dispose of it as your council advises.
- ✦Scrub older stains with a degreaser made for concrete and follow the label.
- ✦Old stains often fade to a faint shadow rather than disappearing completely.
- ✦Never mix cleaning products, and skip acids and paint thinners.
- ✦Keep oil and wash water out of the stormwater drain, which isn't treated.
Quick answer
To remove oil stains from a driveway, soak up any fresh oil with an absorbent such as kitty litter, sweep it up and bag it, then scrub what's left with a degreaser made for concrete and rinse lightly. Fresh spills usually respond well to this approach, while older stains that have soaked into the concrete often fade but don't fully disappear. Whatever method you choose, keep the oil and the wash water out of the stormwater drain.
Before you start
Oil stains are easiest to remove while they're fresh, because the longer oil sits on a driveway, the deeper it soaks into the concrete or pavers.
You'll need an absorbent, such as kitty litter or a commercial oil absorbent, along with a stiff broom, a scrubbing brush and a degreaser made for concrete or driveways. Wear gloves and eye protection, and keep a bucket of water or a hose with a gentle spray nearby for rinsing.
Before you begin, read the product label carefully. Victoria's household chemical safety advice says to read the label, wear gloves and protective clothing, and never mix chemicals, because they can react.
How to clean up a fresh oil spill
- Soak it up. Sprinkle an absorbent over the oil immediately, covering the whole spill. Logan City Council lists kitty litter, peat moss and commercial oil absorbents as suitable materials.
- Leave it to work. Give the absorbent enough time to draw the oil out of the surface, following the product's directions if you're using a commercial absorbent.
- Sweep it up and bag it. Sweep the used absorbent into a sealed bag rather than hosing it away, and dispose of it the way your local council advises. Logan City Council, for example, asks for used absorbents to go to a licensed waste facility.
- Treat what's left. If a visible mark remains, continue with the steps for older stains below.
The NSW Environment Protection Authority says to clean up even small oil spills quickly, because they can easily flow into stormwater drains.
How to remove an older oil stain
- Sweep the area. Remove loose dirt, leaves and grit first, so the degreaser can reach the stain.
- Apply a degreaser. Use a degreaser made for concrete, and follow the label for how much to use and how long to leave it.
- Scrub. Work the degreaser thoroughly into the stain with a stiff brush, paying attention to the edges.
- Lift the residue. Soak up the dirty liquid with an absorbent or rags where you can, rather than washing it all towards the street.
- Rinse lightly. Rinse the treated area with a small amount of water, directing it away from the stormwater drain.
- Repeat if needed. Deep or older stains often take more than one application before you see a real difference.
What to expect from old stains
Because oil soaks into concrete, a stain that has been there for months or years is difficult to remove completely. Each clean usually makes it lighter, and on many driveways an old stain eventually fades to a faint shadow rather than disappearing altogether.
Different driveway surfaces
Plain concrete usually handles a concrete degreaser well. Pavers can be harder, because oil gets into the joints and the edges of each paver. On sealed, coloured or exposed aggregate driveways, check that the product label says it suits that surface, and test it on a small hidden spot first.
What not to use
- Don't mix cleaning products. Mixed chemicals can react, as the Victorian Government's advice warns.
- Skip acids and paint thinners. Some online tips suggest them, but they are hazardous to handle. Stick to a product made for driveways and follow its label, and ask the supplier if you're unsure.
- Don't flood the stain with a hose. Flooding spreads the oil across a larger area and pushes it towards the street.
- Be wary of online hacks. Soft drink, WD-40 and other household tricks are frequently shared online, but a degreaser made for concrete is a safer choice, because its label explains how to use it and how to dispose of it.
Keep oil out of the stormwater drain
In Canberra, there is no treatment plant for the stormwater system, so anything that enters a drain is carried on to local waterways (ACT Government). The NSW EPA puts it simply: the drain is just for rain, and oils and chemicals don't belong there.
In NSW, allowing oil, detergent or wash water to enter drains can be an offence. City of Ryde explains that under the Protection of the Environment Operations Act 1997, pollution includes placing anything where it could be washed into a drain, gutter or waterway.
To protect the drain, soak up oil before you wash anything, bag used absorbents and rags and dispose of them as your council advises, and rinse with as little water as possible. It also helps to fix the leak that caused the stain, or to place a drip tray under the car until it's repaired.
When to call a professional
A DIY clean is a sensible first step, but it may be worth calling a professional if:
- the stain covers a large area, such as a whole parking bay
- the driveway is also dirty, mouldy or stained in other places
- you've tried a degreaser more than once and the stain hasn't changed
- you'd like the whole driveway cleaned evenly, so the cleaned spot doesn't stand out
Our driveway cleaning service treats oil stains with a degreaser before pressure cleaning the whole driveway, and we'll explain what to expect from older stains before we start. For other outdoor surfaces, see our high pressure cleaning service.
Frequently asked questions
📝 References & sources
- ACT Government – H2OK: keeping our waterways healthy
- NSW EPA – Solutions to pollution for small industries and businesses
- NSW EPA – The drain is just for rain
- Logan City Council – Urban stormwater pollution
- City of Ryde – Stormwater pollution
- Sustainability Victoria – Safe management of hazardous household chemicals
Share Your Experience
We'd love to hear your thoughts about this article


