We pressure clean driveways, paths, pavers, car parks and walls across Canberra and Queanbeyan. We set the pressure to suit each surface, pre-treat mould and moss, and soft wash walls that high pressure could harm. Pricing is $4.40 per square metre ($4 + GST), and we confirm it before we start.
Same-Day Satisfaction Guarantee · Canberra and Queanbeyan
Drag to compare results on actual jobs
Loading details...
Quick answers
What people ask most before booking.
How much does pressure cleaning cost?
$4.40 per square metre ($4 + GST), with a $187 minimum job ($170 + GST). A 60 m² driveway comes to $264 ($240 + GST).
What surfaces do you clean?
Driveways, paths, patios, pavers, tiles, brick and rendered walls at homes. Car parks, walkways, entries, shopfronts and strata areas at businesses.
What is soft washing?
A low-pressure clean with a cleaning solution, for painted walls, render and older brick. We use it wherever high pressure could cause damage.
Do you clean car parks and strata areas?
Yes. We can work after hours, and we agree the times with you before the job. Strata visits have the same $187 minimum ($170 + GST).
Every surface gets dirty in its own way, so we don't clean them all the same. Here's what we usually find and what we do about it.
Driveways
Driveways collect oil drips, tyre marks and dark grime where cars park, and shaded edges often grow mould or moss. We pre-treat stains and growth, then clean with a rotary surface cleaner for an even finish.
Our driveway cleaning service page covers prices, paver care and what to expect with old oil stains.
Plain concrete is hard-wearing and handles a firm clean well. The usual problems are ground-in dirt, black mould and green algae in damp spots.
We pre-treat mould and algae, then clean with the surface cleaner. Older or cracked concrete gets a gentler pressure, because a strong jet can open up weak spots.
Pavers
Pavers trap moss, weeds and dirt in the joints between them. Too much pressure can wash the joint sand out or chip the paver edges.
We set a lower pressure for pavers, clear the joints with care and pre-treat any moss so it doesn't come straight back. We don't re-sand the joints afterwards, so some joints may need topping up with sand later.
Patios and tiled outdoor areas get slippery when algae and mould build up, especially on the shady side of the house. Grout lines need care, because high pressure can damage them.
We pre-treat the growth, clean at a pressure that suits the tile and grout, and rinse the area well.
Walls and render
Painted walls, render and older brick can be marked by high pressure. For these we use soft washing: low pressure and a cleaning solution that does most of the work, followed by a gentle rinse.
Leaves, twigs and sludge block gutters and downpipes, so rain spills over the edge instead of draining away. We wash gutters out with high-pressure water and flush the downpipes, on single-storey homes and small business premises.
We clean car parks, walkways, entries, shopfronts and strata common areas. For businesses we can work after hours, so customers and staff aren't in the way.
We agree the times with you before the job. If you manage a strata building, pressure cleaning can sit alongside our regular strata cleaning.
We use a 4,000 PSI pressure cleaner with a built-in rotary surface cleaner.
The surface cleaner spins the water jets under a cover, so flat areas like driveways and car parks get an even clean with less splash. 4,000 PSI is the machine's top output, not the setting we use everywhere.
We adjust the pressure for each surface, and use soft washing where high pressure would cause harm. Our team wears hearing protection and gloves on the job.
High pressure cleaning is $4.40 per square metre ($4 + GST), with a $187 minimum job ($170 + GST). The minimum covers areas up to about 42 m².
A 60 m² driveway comes to $264 ($240 + GST).
Every job includes:
pressure set to suit each surface
mould, moss and algae pre-treatment
degreaser on oil stains
a final check of the finished area before we leave
Not included: we don't re-sand paver joints or seal surfaces after cleaning. If your pavers need new joint sand or a sealer, that's a separate job for a paving or sealing specialist.
Most of the price comes from the size of the area. Heavy oil stains, thick moss or mould, and hard-to-reach areas can take longer, and that can raise the quote.
To measure, multiply the length by the width in metres, then add each area together. Our pressure cleaning prices page has more worked examples.
We confirm the price before we start.
Moving out? You can book pressure cleaning with your end of lease clean, so the outside is done on the same visit.
Most pressure cleaning damage comes from using the wrong pressure on the wrong surface. This is how we avoid it:
1We look first.We check each surface for cracks, loose pavers and flaking paint before we start. If we find existing damage or anything that worries us, we talk it through with you before any cleaning begins.
2We match the pressure.Sound concrete gets a firm clean. Pavers, tiles, grout and older concrete get less. Walls and render get a soft wash.
3We protect what's nearby.We ask you to close windows and doors, and to move cars and outdoor furniture away from the area. We also protect nearby plants.
4We manage the wash water.Water from driveways and paths runs into the stormwater system. The ACT Government notes there is no treatment plant for stormwater, so whatever goes into drains is carried to our lakes and creeks. We plan how to manage the wash water at each site. Depending on the surface and products, this may involve containing runoff and collecting wastewater for proper disposal.
Some results have limits, and we'd rather tell you upfront. Deep, old oil stains often fade but don't fully disappear.
Concrete that is already worn won't look new, but it will look clean.
Our same-day satisfaction guarantee applies to pressure cleaning. Before we leave, we check the finished area, and if anything isn't right, we re-clean it the same day.
Everyone who cleans for us is police-checked, and we carry $20 million public liability insurance. We are a family-owned Canberra business and have been cleaning since 2013.
We bring our own pressure cleaning equipment. You don't need to be home, but we do need access to the area and an outdoor tap.
Call us on 02 5501 3316, or request a quote online. Tell us your suburb, the surface and its rough size, and send a few photos if you can.
We usually reply within 30 minutes during business hours, Monday to Saturday, 7am–7pm. We pressure clean homes and businesses across Canberra and in Queanbeyan.
What a professional clean gives you
Less slip risk
Mould, algae and moss make paths slippery. Cleaning removes the slippery layer.
Surfaces kept intact
Pressure is set to each surface, so joints and render aren't damaged.
Slower regrowth
Pre-treatment helps keep mould and moss from coming straight back.
A clear price
Per square metre, confirmed before we start.
No disruption to business
After-hours work for car parks and shopfronts.
Nothing to hire
No gear to hire or weekend lost. We bring everything.
What to check before you book
Feature
Aussie Duo
What to check before booking
Price
✓ $4.40/m² ($4 + GST), $187 minimum
Ask for a per-m² rate in writing
Pressure
✓ Set to suit each surface
Ask how they protect pavers and joints
Walls and render
✓ Soft washing available
Ask if they soft wash
Mould and moss
✓ Pre-treated before cleaning
Ask how they slow regrowth
Wash water
✓ Planned for each site
Ask how runoff is managed
Insurance
✓ $20 million public liability
Ask for a certificate of currency
Our High Pressure Cleaning services
Explore our comprehensive range of specialised high pressure cleaning solutions, tailored to meet the unique needs of your home or business.
High pressure cleaning is $4.40 per square metre ($4 + GST), with a $187 minimum job ($170 + GST). We confirm the price before we start. Paver re-sanding and sealing are not included.
Our team and equipment on pressure cleaning jobs in Canberra.
📷 Photo
📷 Photo
📷 Photo
📷 Photo
📷 Photo
📷 Photo
📷 Photo
📹 Video
STRAIGHT ANSWERS
Frequently asked questions
High pressure cleaning is $4.40 per square metre ($4 + GST), with a $187 minimum job value ($170 + GST). For example, a 60 m² driveway comes to $264 ($240 + GST). The final price depends on the area, the surface and how dirty it is, and we confirm it before we start.
Yes. Concrete is a hard, tough surface and handles high pressure well. Our team still sets the right pressure for the job to avoid surface marks. Older or cracked concrete is cleaned with more care.
Yes. High pressure water removes mould, algae, and moss from most surfaces. We also pre-treat the area so the growth does not come straight back. This is a common job on shaded paths and south-facing walls in Canberra.
In most cases, yes. We apply a degreaser to break down the oil, then pressure clean the spot. Very old or deep oil stains may fade rather than vanish fully. We will tell you what to expect before we start.
Once a year is a good rule for most Canberra homes. Shaded or damp areas may need it more often. Driveways near trees or gardens also build up grime faster.
Yes. We clean car parks, walkways, shopfronts, and strata areas. For businesses, we can work after hours to avoid disrupting your trade, and we agree the times with you at the site visit. Strata visits have a $187 minimum ($170 + GST).
No, you do not have to be home. We just need access to the area and an outdoor tap. We will confirm the details with you before the visit.
Please close nearby windows and doors, and move cars and outdoor furniture away from the area. We protect nearby plants on the day.
High pressure cleaning uses strong water force for hard surfaces like concrete and driveways. Soft washing uses low pressure and a cleaning solution for delicate surfaces like painted walls and roofs. We choose the right method for each surface.
Yes. Painted walls, render and older brick get a low-pressure soft wash with a cleaning solution, so the surface isn't harmed.
Not when it is done right. We check for cracks and loose pavers first, set the pressure to suit pavers and tiles, and clean grout lines with care. If we find existing damage, we talk it through with you before we start.
No. Re-sanding paver joints and sealing are not part of our pressure cleaning service. If your pavers need either after cleaning, a paving or sealing specialist can help.
Yes. High pressure water clears moss, weeds, and built-up grime from paver joints. We can also treat the area to slow regrowth.
Yes. We clean brick, render, and exterior walls. Walls usually get a softer, controlled clean so the surface is not harmed.
Multiply the length by the width in metres, then add each area together. A driveway 10 m long and 6 m wide is 60 m², which comes to $264 ($240 + GST).
Yes. Our same-day satisfaction guarantee applies to pressure cleaning. Before we leave, we check the finished area, and if anything isn't right, we re-clean it the same day.
Yes. We carry $20 million public liability insurance, and everyone on our team is police-checked.
We cover Canberra, Queanbeyan, Florey, Belconnen, Gungahlin, Jerrabomberra, Googong, and nearby suburbs across the ACT and NSW.
A standard driveway takes one to two hours. Larger jobs, like a full home exterior, can take half a day. We will give you a time estimate with your quote.
Have a question not listed here?
Talk directly to Mark, lead technician — no call centre, no script.
Send us a few photos and rough sizes. We'll confirm the price before we start. We usually reply within 30 minutes during business hours, Monday to Saturday, 7am–7pm.
